Brief Introduction

CDM2B40-450AZ

SMC's cylinder CDM2B40-450AZ Key ParametersType: Standard round cylinder (compliant with ISO standards, highly versatile, suitable for most pneumatic automation applications)Bore Diameter: 25 mm (corresponding to "25" in the model; thrust is approximately 245 N at 0.5 MPa, suitable for light to medium-load actuation)Stroke: 80 mm (corresponding to "80" in the model; short stroke with fast response speed)Built-in Magnetic Ring: None (select a model with a magnetic ring if position detection is required)Port Thread: Rc 1/8 (standard small-flow port)Pressure Range: 0.1 – 1.0 MPa (pressure resistance: 1.5 MPa)Temperature Range: -10 ~ 60 ℃Piston Speed: 50 – 500 mm/s (installation of a flow control valve is recommended)Cushioning Method: Air cushioning (the "C" in the model indicates air cushions at both ends to reduce impact at the end of the stroke)Mounting Method: Basic type (N indicates a standard tie-rod cylinder, compatible with various mounting accessories)ApplicationsSuitable for general linear actuation scenarios with short stroke and light to medium load, such as:Material pushing and positioning in automated production linesClamping and jacking of small tooling fixturesPressing and conveying control in packaging machineryAuxiliary pushing and sorting in warehousing and logistics equipment